Clarion OHM641 User Manual
Page 5
4. Place the gasket around the housing and plug the cables into the monitor.
Mount the housing to the mounting bracket with the 4 machine screws
provided.
5. You can now run the IR, power and video cables to their respective
destinations. If you’re using the VDH9600 or DVD9600, you can make all
of your connections there.
PICTURE ADJUSTMENT
Brightness
To adjust the picture brightness, use the Brightness UP and DOWN buttons
located on the front panel of the OHM641. Press the UP button to increase the
picture brightness. Press the DOWN button to decrease the picture brightness.
Viewing Angle
To adjust the viewing angle gently tilt the cabinet to the desired posiion. The
recommended viewing angle of the unit is – 30 to +10 degrees vertical and +45
to –45 degrees horizontal.
5