Tjernlund 950-1021 Motor Kit 8504049 Rev 2 11/96 - Manual (Page 2)

REV. 2, 11/96 © 1996 TJERNLUND PRODUCTS, INC. P/N 8504049
HSUL CONNECTED TO 24V ELECTRONIC IGNITION HSUL CONNECTED TO 24V STANDING PILOT
HST CONNECTED TO 24V ELECTRONIC IGNITION HST CONNECTED TO 24V STANDING PILOT
HST CONNECTED TO AN R8184G
BURNER MOTOR LESS THAN 3 AMPS @ 120 VAC
TYPICAL HS-SERIES POWER VENTER GAS WIRING DIAGRAMS
TYPICAL HST-SERIES OIL WIRING DIAGRAM
NOTE
IF YOUR ELECTRICAL DIAGRAM IS NOT
INCLUDED, CONTACT OUR CUSTOMER
SERVICE TOLL FREE AT 1-800-255-4208,
7:30 TO 4:30 CST FOR FURTHER
ASSISTANCE.
SERVICE
Specific instructions cannot be made con-
cerning frequency of lubrication. Usually oil-
ing every 3 months during the heating sea-
son will be sufficient. NO MORE THAN 3
DROPS of SAE 20 oil should be used. Oil
holes or lances are provided at the front and
rear faces of motor.