Tjernlund 950-1022 Motor Kit 8504050 Rev. 1 11/96 - Manual (Page 2)

REV. 1, 11/96 © 1996 TJERNLUND PRODUCTS, INC. P/N 8504050
NOTE
IF YOUR ELECTRICAL DIAGRAM IS NOT INCLUDED,
CONTACT OUR CUSTOMER SERVICE DEPARTMENT
AT 1-800-255-4208, 7:30 TO 4:30 CST FOR FURTHER
ASSISTANCE.
SERVICE
Specific instructions cannot be made concerning frequency
of lubrication. Usually oiling every 3 months during the
heating season will be sufficient. NO MORE THAN 3
DROPS of SAE 20 oil should be used. Oil holes or lances
are provided at the front and rear faces of motor.
OLD STYLE HS-3 GAS WIRING TO ANY APPLIANCE EQUIPPED WITH 24V CONTROLS
NEW STYLE HS-3 WITH FACTORY WIRED JUNCTION BOX
GAS WIRING TO ANY APPLIANCE EQUIPPED WITH 24V CONTROLS