Tjernlund X2R XCHANGER Reversible Basement Fan 850402 Rev A 07/14 User Manual
Page 7
6
12. WARNING: Unplug fans from wall outlet or accessory controls when changing fan direction to prevent damage or injury. Insert
fans in desired direction for either exhaust or intake. See arrow on bottom of fan cartridge or side of fan shroud for air flow direc-
tion. Once installed confirm the air is being exhausted or supplied depending upon application, (See Diagram M). NOTE: Use
optional DT2-6 kit if ducting on discharge side.
13. The X
CHANGE
R
TM
comes with (2) air infiltration magnetic draft stops to block incoming air during seasons or periods when the
X
CHANGE
R
TM
is not in use if desired. Place magnet(s) over X
CHANGE
R
TM
fan opening(s) when fan is not in use to block air infiltra-
tion. Place magnet(s) on side of X
CHANGE
R
TM
cabinet so they are not lost if not in use to block fan openings, (See Diagram N).
MAINTENANCE
The X
CHANGE
R
TM
hood screen must be inspected every 3 to 6 months. Remove any
foreign material such as leaves, lint, cottonwood or other items. Remove screen to
clean if necessary, (See Diagram O).
HOW HOW TO OBTAIN SERVICE ASSISTANCE
HOW TO OBTAIN SERVICE
1.
If you have any questions about your X
CHANGE
R
TM
or if it requires adjustment, repair or routine maintenance, we suggest
that you contact your installer, contractor or service agency.
2.
If you require technical information contact Tjernlund Products, Inc. at 1-800-255-4208 or email us at [email protected].
When contacting Tjernlund Products, Inc., please have the following information available:
1.
Model number and date code of the X
CHANGE
R
TM
2.
Name and address of installer and service agency
3.
Date of original installation and dates any service work was performed
4.
Details of the problem
LIMITED PARTS WARRANTY AND CLAIM PROCEDURE
Tjernlund Products, Inc. warrants the components of the X
CHANGE
R
TM
for one year from date of installation. This warranty covers
defects in material and workmanship. This warranty does not cover normal maintenance, transportation or installation charges for
replacement parts or any other service calls or repairs. This warranty DOES NOT cover the complete X
CHANGE
R
TM
if it is operative,
except for the defective part.
Tjernlund Products, Inc. will issue credit or provide a free part to replace one that becomes defective during the one year warranty
period. All receipts should include the date code of the X
CHANGE
R
TM
to ensure that the defective component corresponds with the
complete unit. This will help prevent possible credit refusal.
1.)
Follow troubleshooting guide to determine defective component. If unable to determine faulty component, contact your
Tjernlund distributor, Tjernlund Products Technical Customer Service Department at 1-800-255-4208 for troubleshooting
assistance or email us at [email protected].
2.)
After the faulty component is determined, return it to your Tjernlund distributor for replacement. Please include X
CHANGE
R
TM
date code component was taken from. Credit or replacement will only be issued to a Tjernlund distributor after the defective
part has been returned prepaid to Tjernlund.
DIAGRAM O
INSERT HOOD
SCREEN IN HOOD
GUIDES.
DIAGRAM M
WARNING: UNPLUG FANS WHEN CHANGING
DIRECTION. SEE ARROW ON BOTTOM OF FAN
CARTRIDGE OR SIDE OF FAN SHROUD FOR
AIR FLOW DIRECTION. NOTE: USE OPTIONAL
DT2-6 KIT IF DUCTING ON DISCHARGE SIDE.
DIAGRAM N
PLACE MAGNETIC DRAFT STOPS OVER XCHANGER FAN OPEN-
ING(S) WHEN FAN IS NOT IN USE TO BLOCK AIR INFILTRATION IF
DESIRED. PLACE ON SIDE OF CABINET IF NOT IN USE SO THEY
ARE NOT LOST.