Torbal AGS Moisture Analyzer Instruction Manual - Manual (Page 29)

29
1. To begin weighing, press the Mode Return key (Ж Ж) to switch from a Moisture Analyzing Mode to a
Weighing Mode or vice versa. The scale is ready to begin weighing as soon as the stabilization indicator
( ) appears on the display.
2. When weighing, always place the mass in the middle of the pan. The weighed result may be taken when
the stabilization indicator appears on the display.
16.1. Taring
1. If a container is used for weighing, it may be tared. In taring the container, the scale subtracts the
weight of the container from the gross weight to obtain the net weight.
2. To tare the weighing container, place it in the middle of the pan. The container’s weight will be
shown on the display.
Chapter 16: Weighing