Torbal IP68 Rated - Manual (Page 56)

- 56 -
4. Once the weight has been added, remove the object from the weighing pan.
5. Wait for the scale to return to 0 and place the second object on the pan. . Once the Weight of the object
stabilized press the data transfer key to accept and add the second object weight to the total.
6. Follow steps 3 through 6 until all object have been added. To view the total of the transaction press the
Toggle key and the Total screen will appear, press the TOGGLE key again and the N7umber of
Measurements screen will appear, press the TOGGLE key again and the Transaction Average screen will
appear.
Total Number of measurements Transaction Average
7. Press the TOGGLE again and a screen saying “totEnd” will appear, press the TOGGLE key again and the
scale returns to the weighing mode without clearing the parameters and allows the user to continue the
totalizing process. If the TARE key is pressed instead of the TOGGLE key the screen alternates between
YES and NO. If the TARE key is press while YES is displayed the stored ingredient weights are cleared but
the unit remains in the Total mode. If the TARE is pressed while NO is displayed the stored ingredient vales
are retained and the scale remains in the Total mode.
0.00
0.55
n 2 0.77
0.39