CITIZEN PPU-231 - Manual (Page 91)

PPU-231 User’s Manual
78 CITIZEN
GS / m
[Function] Printing the Download, Bit Image
[Code] <1D>H<2F>H<m>
[Range] {0
≤ m ≤ 03} Data is described in Hex code.
[Outline] Prints download bit image in a mode specified by m.
• Modes can be selected by m are shown below.
m Mode Name Dot Density in
Vertical Direction
Dot Density in
Horizontal Direction
0 Normal mode 203 DPI 203 DPI
1 Double wide mode 203 DPI 101 DPI
2 Double high mode 101 DPI 203 DPI
3 Double wide/double high mode 101 DPI 101 DPI
[Caution]
• When data exist inside the print buffer, this command is ignored.
• When a download bit image has not been defined, this command is ignored.
• A portion of a download bit image exceeding one line length is not printed.
• A download character and a download bit image cannot be defined simultaneously.
[Default]
• The initial value is not specified.
[See Also] GS
∗
[Sample Program] [Print Results]
See Sample Program and Print Results for GS
∗ on Page 76.