Tycon Power TP-SW8(-NC) - Manual (Page 4)

User’s Manual TP-SW8
TYCON POWER SYSTEMS
4
*PWR Indicator
LED STATUS Description
Power Green LED ON if power input has valid power
supplied. (via the terminal block on rear
panel or Port 8 on front panel)
Red LED ON if the following condition
happens.
*Power input under voltage (Vin<12V)
*Power input over voltage (Vin>58V)
*PoE over current(2A)
The indicator is used on TP-SW8
Off No power in DC input
*SWITCH indicator (the right LED on RJ45)
LED STATUS Description
P1~P8
Link/Act
Green A network device is detected at 100Mbps,
but no communication activity is detected.
Green
Blinking
This port is transmitting to, or receiving
package from another device at 100Mbps.
Yellow A network device is detected at 10Mbps,
but no communication activity is detected.
Yellow
Blinking
This port is transmitting to, or receiving
package from another device at 10Mbps.
Off No device is detected.