Tycon Power TP-SW8(-NC) - Manual (Page 6)

User’s Manual TP-SW8
TYCON POWER SYSTEMS
6
Rear panel terminal block wiring detail:
You may use the TP-SW8 with our AC adaptor products as the below: (OPTION)
PSHP-18 PSHP-24 PSHP-48
Maximum output 18VDC/7.5A 24VDC/6.25A 48VDC/3.125A
Related model TP-SW8-NC TP-SW8-NC
TP-SW8
TP-SW8-NC
*Ethernet Port/PD Port Wiring
The PoE Switch supports Port 1 to Port 8 with automatic MDI/MDI-X crossover, autosense of the
speed and duplex for 10Base-T or 100Base-TX connections. Automatic MDI/MDI-X crossover
allows you to connect to other devices (switches, hubs, or workstations etc..), without regard to
using straight-through or crossover cabling.
Port 1 to port 7 also provides PSE function which delivers DC power through the spare pairs (pair
4,5 and pair7,8) to the PD. Port 8 provides PD function that receive power from 4 pairs or 2 pairs
Ethernet cable.