Tycon Power RPST2424-100-280 - Manual (Page 3)

3
STEP 5: If pole mounting the en-
closure, assemble the pole mount
kit to the back of the enclosure
and mount the enclosure to a pole
using the 6 hose clamps provided.
The enclosure can also be wall
mounted using the 4 holes in the
back of the enclosure.
STEP 6: Insert the battery plat-
form in the bottom of the
enclosure. The battery
platform has cutouts so
wires can be routed un-
der the battery as need-
ed.
STEP 7: Attach the green DIN Rail adapt-
ers to the charge controller using the screws
provided. Clip the controller to the DIN rail.
STEP 8: Assemble the solar panel mount
and set the correct tilt angle based on your
Latitude. There is a useful tool to calculate