United Security 900MHz Wireless Pressure Mat User Manual

Page 7

Advertising
background image

WPM is a pressure activated security mat with a built-

in 900MHz transmitter. When paired to USP 900MHz

Receivers, WPM becomes a convenient and portable

means of detecting unwanted intruders.

WPM is waterproof and may be used outdoors. It

should not be submersed in water or other liquids.

The Mat can be loosely rolled or folded (in one

direction only) for storage.

Setting up your WPM for use with a USP 900MHz

Receiver

1. First, set up the USP 900MHz Receiver that WPM

will be transmitting to. Follow the Receiver

Instructions carefully and, if possible, locate it at a

height five feet above the floor.

2. Open the Velcro seam on the side of the WPM by

gently pulling it apart.

3. Reach inside and carefully pull the Transmitter

from its pocket inside the Mat.

4. Locate the two-part Red Connector and plug it

securely together.

5. Place the Transmitter (and wiring) inside the Mat,

situating the Transmitter as shown in Fig. A,

Page 5

6. Close the Transmitter pocket by pressing the

Velcro seam together.

Note: If you purchased WPM with a USP 900MHz Receiver it

has been programmed (coded) to work with that Receiver.

United Security Products (T) 800-227-1592

(F) 858-413-0124

www.unitedsecurity.com

[email protected]

U.S. and World Patents issued and pending

on certain products.

MADE IN U.S.A.

1

Thank you for choosing….

091508 Rev. A

Advertising