Canon CD-4070NW - Manual (Page 25)

Chapter 3. Getting Started
20
Getting Started
This chapter describes how to prepare the machine before using it with procedures for connecting cables,
turning the power ON/OFF, and inserting/removing discs.
Connecting the Network Cable and Peripherals
To use the CD-4070NW over a network, connect a 10Base-T/100Base-TX compliant network cable to the rear
of the scanner. Connect a mouse, keyboard, and monitor according to your preference.
Network Cable
(10Base-T/100Base-TX)
VGA Monitor
(640 x 480 dpi)
PS/2 Mouse
PS/2 Keyboard
IMPORTANT
• Connect a mouse and keyboard before turning the scanner ON.
• Your local authorized Canon dealer will configure or confirm the network settings in the presence of your network
administrator.
• A mouse and keyboard are required in order to configure the network environment and other settings.
Connecting the Power Cord
Connect the power cord provided with the document recorder to
the power connector on the rear of the document recorder, and
insert the power plug into the power outlet.
IMPORTANT
• Use only the power cord provided with the document recorder.
• When using an uninterruptible power source (UPS), insert the
power plug into that.
• Be sure to connect the power cord while the document recorder’s
power switch is in the OFF position.
Chapter 3