Button light – Universal Remote Control (URS) TRC-780 User Manual

Page 6

Advertising
background image

TRC-780 O

WNER

S

M

ANUAL

steps down to a minimum time of 5 seconds.
Pressing the More side will increase the time in
steps up to a maximum of 60 seconds. Once the
setting is adjusted, press the Save button. Pressing
the Cancel button will revert the remote’s Automatic
Turn Off setting to the last saved setting.
Note: The longer the OLED screen stays on, the faster

the batteries will deplete.

Button Light

The Button Light settings page provides two
configurable options for how the TRC-780’s
hard buttons should behave.

1. Automatic ON: Adjusting this setting will

control when the hard button backlight
turns on.

a. Automatic Light Yes: Every time a

button is pressed the button back light will

automatically turn On.

b. Automatic Light No: The only way to turn on the hard

button back-light is to press the dedicated Lights button
located on the right side of the remote control.

Once all changes have been made, press the Save button.
Pressing the Cancel button will revert to the remotes last saved
setting.
Note: The more often the back light turns On, the faster the
batteries will deplete.

2. Automatic Turn Off: You can adjust the amount of time the back-

light will remain after a button is pressed.
Press the left and right screen buttons next
to the slider bar to change the duration.
Pressing the Less side will decrease the time
in steps down to a minimum of 5seconds.
Pressing the More side will increase the time
in steps up to a maximum of 60 seconds.
Once the setting has been adjusted, simply
press the Save button. Pressing the Cancel button will revert to
the remote’s last saved Automatic Turn off setting.
Note: The longer the backlight stays on, the faster the batteries
will deplete.

Page 3

Advertising