Universal Remote Control (URS) TKP-7000 - Manual (Page 12)

Page 9
TKP-7000
Status Bar
The Status Bar, located directly above the Core Buttons, provides
valuable status and feedback of the Total Control system.
The four sections of the Status Bar are determined by the system
programmer, and are customizable per keypad,so it is not possible
to explain how your keypad looks; however, after reviewing the
following possibilities, there should be no need for further explanation.
Sunrise Time: Updated at midnight every day, this will show the
sunrise time for the next day.
Sunset Time: Updated at midnight every day, this will show the
sunset time for the next day.
URC Thermostat Temperature: If a THZ-100 (URC's thermostat) is
included in your home, this will show the current temperature status
based upon the internal sensor, additional sensor or the mean
temperature of both.
Alarm Clock: If the room being controlled has an Alarm that is set
to activate for that room the status bar will display an alarm clock
icon and the next scheduled time/day.
Surround Mode: When used with URC's DMS-AV Surround Processor
this will display the current surround mode of the processor.
Room Linked Status: Whenever the chosen room/area is “linked” to
other rooms, this will show a link
acknowledgment and icon.
Weather Alerts: Based on the current location entered by the system
programmer, the words “weather Alert” will appear
if an automatic alert is received via internet.
Vacation Mode: Whenever the Vacation Mode is activated for the
Total Control system, the status bar will display “Vacation Mode:
ON”.