Universal Remote Control (URS) TKP-100 - Manual (Page 6)

Page 3
TKP-100 K
EYPAD
Frequently Asked Questions
Can I change the button layout of my TKP-100 myself?
No, the buttons correspond to the programming done by your URC
Certified Dealer. To make any changes to your TKP-100 button lay-
out contact your URC dealer to discuss your request. There may be
an additional charge associated with changing button layouts after a
TKP-100 has been installed in your system.
I decided I would like to have different button labels added to my
TKP-100 keypad, how do I make that happen?
Contact your URC Certified Dealer who can order and install buttons
with different labels. There may be an additional charge associated
with changing out buttons after a TKP-100 has been installed in
your system.
Are "Blank" buttons available for the TKP-100 keypad?
Yes, "Blank" buttons are available through a Certified URC Dealer.
My TKP-100 is not working, or has locked up, what do I do?
You can reset the TKP-100 keypad by pressing and holding the top
button and the button at the lower left for five seconds. If resetting
the TKP-100 does not solve your problem, contact your Certified
URC Dealer for assistance.
Specifications
Microprocessor: 55MHz RISC
Memory: 4 Megabits of Serial Flash, 512KB Flash, 128KB SRAM
Macro Capability: Unlimited via the MRX-10
Network: One 10/100 Ethernet port (Indicator 2 LED, PoE)
Indicator: On/Off LED 7 Button (Orange/White)
Power: PoE
Size: 4.12” x 1.75 x 1.25” (H x Wx D)
Weight: 0.18 lbs. (0.082Kg)