Vetter Water tanks User Manual
Page 5
Page 4/6
4.2
Emptying and packing
In order to empty, couple the adapter (2“ to 4“) to the ball valve
situated on the water tank with the Storz A connector. Then con-
nect the C-hose to the adapter and open the ball valve for cont-
rolled emptying and draining of the liquid.
After completely emptying of the water tank it must be cleaned
before being folded away. Water tanks are only permitted to be
packed after being cleaned and dried. Sharp and pointed objects
must also be kept away from the water tank.
4.3
Maintenance and cleaning
In order to guarantee high reliability and long life duration, the
water tanks are to be cleaned and dried after every operational
period. Normally the tanks are cleaned with warm water and a
soap solution, drying is made at room temperature.
In addition to this, never drag the water tank over the ground or
throw it.
A contaminated water tank is to be decontaminated with a suita-
ble disinfectant.
5.
Inspections
The water tanks are to be inspected for perfect and correct condi-
tion before and after every operational period:
9
The PVC folding tank is free of any damage such as tears, cuts,
punctures, separations, hardened or soft areas caused by che-
mical or thermal effects.
6.
Taking the product out of operation
In case the water tank is taken out of operation then this must
be disposed of as special waste. If required, the manufacturer can
supply you with more detailed information regarding this.