Vetter Universal tents - Manual (Page 7)

Page 6/12
4.3 Deflation
The deflation of the support frame happens over the inflation
connection. To deflate the tent, close the air source (compressed
air cylinder, etc.) and disconnect the pressure reducer or the filling
hose of the blower. The deflation valve is opened by pressing-in
and turning the pin (1) counter clockwise.
1
Pin before locking Pressing-in + turning Valve open
Fold the tent in the way, that the air can escape (Folding to the
direction of the inflation connection). Any remaining air can be
removed with a vacuum adaptor (Item No.: 1700018300) in com-
bination with an construction-site compressor adaptor (Item No.:
1600012000).
Connect the construction-site compressor adaptor (1) to the cou-
pling of the vacuum adaptor (2) and turn it interlocking. Then
tighten the screwable part of t the vacuum adaptor. Now connect
the constructionsite compressor adaptor to the support frame.
Attach the quick-action coupling (3) to the connection hose of
the pressure regulator and open the hand valve of the pressure
regulator slowly.
It is also possible to deflate the support frame with a blower with
deflate function. Follow the operating instructions of the blower.
After deflation and before packing, the valve
must be unlocked again in order to guarantee
perfect inflation when it is next used!
2 1 3