Vintage Cellars VintageView 4' Island Display Rack Assembly Instructions User Manual
Vintage Cellars Equipment
VintageView Select 4
(IDR4-PRS) Assembly
Instructions
Wine Master Cellars, LLLP • 10645 E 47th Ave, Denver, CO 80239 • phone: 866.650.1500 • fax: 866.650.1501
Please feel free to contact us regarding the assembly of this product.
†
IDR Extension packages contain only 1 IDRx-UPRIGHT and 2 footer pads.
Hardware shown
actual size
4 X
†
Footer Pad
8 X
IDR-PR
2 X
†
IDR4-UPRIGHT
24 X
IDR-PR Assembly
Screws
16 X
IDR-PR Assembly Bolt
32 X
IDR-PR Assembly
Washer
Required tools: Electric Screw Driver with #2 Phillips Bit
2 X 14mm (or adjustable) Wrench
IDR-AK - included with IDR and contains an
8mm Nut Driver and Alignment Tool
1. Assemble presentation racks – Position presentation racks
back to back as shown. Using nut driver (included), a Phillips
head screwdriver (not included) attach presentation racks with
presentation rack assembly screws. Fully tighten.
2. Install footer pads - Thread footer pads into the
bottom of the uprights and tighten with a 14mm wrench.