Casio EXILIM EX-H20G - Manual (Page 109)

109
Using the Hybrid-GPS
As with normal images (without location information), use the PLAY mode to display
images with location information.
See page 30 for the procedure for viewing images.
• While an image with location information is on
the display, pressing [8] (DISP) will display the
location information (latitude and longitude) that
was recorded with the image.
IMPORTANT!
• In the PLAY mode, you cannot display the map
where the image was recorded while the image
is displayed.
Use this procedure when you want to clear the location information (latitude,
longitude, direction, place name) recorded with an image.
IMPORTANT!
• Remember that a location information delete operation cannot be undone.
1.
In the PLAY mode, use [4] and [6] to select the image whose location
information you want to clear.
2.
Press [MENU]. On the “PLAY” tab, select “Delete Site Info” and then
press [6].
3.
Use [8] and [2] to specify what you want to clear and then press
[SET].
Displaying Images with Location Information (PLAY Mode)
Viewing an Image with Location Information
Clearing Location Information Included with an Image
(Delete Site Info)
Delete Lat/Long
Deletes the latitude, longitude, and direction recorded with
the image.
Delete place Deletes the place name recorded with the image.
Cancel Cancels the operation without deleting anything.
Place name
(Name scrolls if it is too long
to fit.)
Latitude and longitude