Vinten Radamec Fusion FH-145 - Manual (Page 11)

FH/FHR-145 Pan and Tilt Head
Installation
Adjusting the Camera Cradle
The FH-145/FHR-145
The maximum payload is 65 kg (145 lb).
mounting plate
.
is delivered with the camera cradle
attached. Note that the cradle is set to the highest setting
during transport.
The camera cradle consists of two parts: a backplate and a
mounting plate. The backplate is height adjustable and the
two-way height-adjustable
features rod
openings for the pan bar assembly for manual operation of
the FH-145 (see page 7 for details)
Refer to page 10 for instructions on how to adjust the cradle.
Installation Guide
Locking/Unlocking the Camera Cradle
The tilt lock the camera cradle in the
horizontal position, to provide a stable platform when making
adjustments or when lifting the head. The tilt lock is located at
the back of the head, on the left-hand side.
mechanism secures
WARNING! The tilt lock MUST be engaged before
installing or adjusting the camera or payload.
Note: The tilt lock can only be operated when the
camera cradle is in the horizontal position.
WARNING! Heavy – Depending on the weight of
the camera and payload combination, adjustments
to the cradle must be carried out by 2 or 3 persons.
WARNING! Always support the backplate and/or
mounting plate when adjusting them.
9