Vinten Radamec HS-105P Pan & Tilt Head - Manual (Page 22)

Operators guide
21
Connecting auxiliary equipment
The HS-105PE and HS-105PENLD environmental pan/tilt heads can support auxiliary
equipment such as lens washers and demisters. Auxiliary equipment is connected to the
Control connector [18] on the head. Cabling is not supplied for the connection of auxiliary
equipment; however the connector required to construct an auxiliary equipment cable can be
supplied by Vinten Radamec.
NOTE: The Power/data connector on the native lens drive cable (V3980-5005) may
need to be removed to allow the cable to be fed into the environmental
housing. All installations should be performed by trained and competent
engineers.
Fig 10 HS-105PENLD pan/tilt head with native lens drive - cabling
HS-105PE-NLD
V3977-0001
V3980-5035
Note:
The native lens drive must be installed
within an environmental housing with the
camera and other accessories.