Vinten Radamec Vision 250E - Manual (Page 7)

7
Introduction
The Vision 250E combines a manually-operated EFP-type pan and tilt head with electronic en-
coders to provide precise real-time digital electronic positioning.
Pan bar mounting points are located at the rear of the head, on either side of the camera mounting
platform. A telescopic pan bar
(2) is supplied and is attached using a pan bar clamp, with angular
adjustment available on the mount serrations. A second pan bar may be fitted.
The head has a flat base (17) , with `Quickfix'® and standard four-hole fixing. Mounting bolts,
washers and a spanner are also provided.
The camera is attached to the head by means of a slide plate (13) . A clamp (1) is provided to hold
the slide plate in position and a lock (11) prevents its inadvertent removal from the head.
Balance graph
200
180
160
140
120
8
7
6
5
100
4
80
60
3
2 50
2 4 6 10 12 14 16 18 20 22 24 38 36 26
80 75 70 50 45 40 35 30 25 20 15 10 5
in. mm
kg
lb
± 90°
± 68°
70
90
110
130
150
170
190
8 28 30 32 34 40 42
55 60 65 85 90