Probe indicators, Probe indicators -4, Tm 262 – Welch Allyn TM 262 Auto Tymp - User Manual User Manual
Page 22
Advertising
TM 262
2-4
Revised 4/11/08
Probe Indicators
Figure 1: Probe indicators
P1 - Yellow:
The probe is occluded. Remove the probe and inspect for cause of
occlusion.
P2 - Green lamp: Blinking - The instrument is ready to begin a Tymp.
Steady green - test successfully started and in progress.
P3 - Orange:
A pressure leak has been detected.
Advertising