Welch Allyn EpiScope Skin Surface Microscope - User Manual User Manual
Welch Allyn Equipment
Advertising
Table of contents
Document Outline
- Welch Allyn EpiScope™ Skin Surface Microscope Directions for Use
- Care and maintenance
- 1. Remove the contact plate as shown:
- 2. Apply disinfectant to the contact plate per disinfectant agent manufacturer's instructions.
- 3. After disinfection, the optical element may be recleaned if necessary.
- 4. Re-install contact plate on to the EpiScope.
- 1. Inspect the EpiScope for signs of damage.
- 2. Appropriately discard any component that shows evidence of damage or deterioration.
- 3. Contact Welch Allyn for component replacement.
- 4. Verify the proper operation of the EpiScope per this manual’s directions for use.
- Storage
- Lamp replacement
- Power sources
- Accessories
- Warranty
- Technical specifications