Welch Allyn AcuityLink Clinician Notifier - Software installation - Manual (Page 18)

14 Initialize the Clinician Notifier program on the mobile device Welch Allyn AcuityLink Clinician Notifier
Start the Clinician Notifier program
To start the Clinician Notifier program
1. In the Run Status page, tap Run.
If the Clinician Notifier program does not start, tap , and then tap Clinician
Notifier.
Various screens come and go, including a Checking for Updates page.
Eventually, the following AcuityLink Clinician Notifier page appears.
2. Refer a clinical or hospital administrator to the Welch Allyn Connectivity Server
Directions for Use to register the device.