Welch Allyn Connex ProView - User Manual - Manual (Page 3)

Connex ® ProView installation and user guide 80019229 Version: B
Page 3 of 7
Intended use
The Welch Allyn Connex® ProView program allows you to check on data actively being processed by the
Welch Allyn Connex® Central Station as well as troubleshoot issues where the data is not being properly
processed.
Users of the program are expected to have strong computer skills and will use the software as a means to help
diagnose workflow, networking, or configuration issues that might prevent patient data from reaching the
EMR. Typical users include Welch Allyn service team members and HL7 system administrators.
Setup
Create roles and users
Before using the program, roles and users must be created.
Create the ProView role
1. From the Connex CS Server desktop, launch the Connex CS Administrator Tools ( ).
2. Select the Role tab and click Create new role.
3. Enter ProView as the new role, select the AdminSystem privilege, and click Save.
A confirmation dialog appears indicating the role is saved.
4. Click OK.
Log back into the program to complete the changes.
Create the VitalTestApp role
WARNING Patient data risk. Create the VitalTestApp role only in your network's test
environment. Do not create this role in an environment that interacts with actual patients.
Sending vitals tests to a live hospital network may interfere with current patient data.
1. If necessary, launch the Connex CS Administrator Tools program.
2. Select the Role tab and click Create new role.
3. Enter VitalTestApp as the new role, select the AdminSystem, CreatePatient, CreateTest, and
EditAnyPatient privileges, and click Save.
A confirmation dialog appears indicating the role is saved.
Click OK.
Log back into the program to complete the changes.Create the
ProView user
1. If necessary, launch the Connex CS Administrator Tools program.
2. Select the Users tab and click Add.
3. Enter the user information and select ProView in the User Roles section.
4. Click Save.
A confirmation dialog appears indicating that the role is saved.
5. Click OK.
Log back in to the program to complete the changes.