Welch Allyn RL-100 Rhinolaryngoscope - User Manual - Manual (Page 8)

COUPLING CAMERA / ADAPTOR / EYEPIECE
TO UNIT CONTROL
Locate the male end of the camera cable (with pins). Position the
raised alignment locator on the end of the camera cable with the
alignment groove located at 1:00 on the camera cable connector on
the control unit. Gently push connector into the camera cable
connector on the control unit until it snaps into place. Tighten the
retaining collar until snug. Couple the remaining end of the camera
cable to the camera by aligning the location groove in the cable
connector with the raised pin in the camera connector. Push
together, and tighten retaining collar securely.
CAMERA
I