Welch Allyn Multi-Operatory Air Abrasion Accessory - User Manual - Manual (Page 6)

990229 REV C 6
Handpiece Tube - Connected to the output end of each pinch tube, and routes to
each operatory, provides air/powder to the handpiece (handpieces provided with the
Mach 5/5+ accessory kit).
Manifold Assy - Provides air/abrasive to both pinch tubes when connected with its
interconnect tube.
Power Module - Provides power to the Multi-Operatory unit.
Interconnect Tube - Tubing connecting the Multi-Operatory unit pinch tube
manifold with the Mach 5/5+ abrasive air outlet fitting.
Remote Coupler - Connects the Multi-Operatory Accessory to the Mach 5/5+
remote control cable.
Specifications
For further technical information, please contact your sales representative or the
Kreativ Service Center.
Power Input 100-240 V~, 50/60 Hz, 0.75-0.35 A
Weight 5.5 lbs. (2.5 kg)
Dimensions 6.3”H x 4.1”L x 6.5”W (w/o mtg. bracket)
(16 x 10.4 x 16.5 cm)
Environmental Limitations Operating Storage/Transport
Temperature +41 °F to 104 °F +14 °F to 158 °F
(+10 °C to 40 °C) (-10 °C to 70 °C)
Humidity 10 % to 90 % non-condensing
Pressure 7.3 psia to 15.4 psia
(50 kPa to 106 kPa)
Maximum tubing length +/- 16 ft from Mach 5/5+, 32 ft total
between operatories