Welch Allyn CardioPerfect PRO Link Cable insert - User Manual - Manual

CardioPerfect
PRO Link Cable insert
Welch Allyn, Inc
4341 State Street Road
Skaneateles Falls, NY
13153-0220 USA
www.welchallyn.com
Replacing your PRO Link cable?
If you are replacing an existing PRO Link cable and have an interface to an Automatic BP you
may notice a slight change. The new style cable is compatible with your existing software and will
function as your existing cable by following the diagrams below.
Old Style New Style
Analog ECG output
The Welch Allyn PRO Link interface cable now can produce an analog output, rendered on port
1, that is an approximate representation of the QRS complex on lead II.
Note: The analog output does not function with 1200Hz Pro-Recorder models.
The analog signal output is dependent on the input stimulus but ranges in amplitude from 0 volts
to 5 volts peak to peak. This option is possible for users with 1.6.1 or newer software. If you
would like more information on this option contact your local Welch Allyn Distributor.
Note: This output is not suitable for cardioversion synchronization.
Note: Cables which connect to the Pro Link must be terminated in a mini-phone, stereo plug.
712989 Ver. B
TTL Analog