Welch Allyn LB-24 Solarc Light Source - User Manual - Manual (Page 10)

6 S o larc Light Source
Dispose of the lamp according to local, state, and federal
laws.
Cleaning
1. Turn the Solarc Light Source off ( ) and unplug the power
cord from both the wall outlet and the rear of the unit.
2. Wipe the external surfaces clean with a cloth dampened with
mild soap and water. DO NOT IMMERSE.
3. Wipe the power cords clean with a cloth dampened with mild
soap and water. DO NOT IMMERSE. DO NOT RECONNECT
WET.
4. DO NOT plug the power source into a wall outlet until it is
thoroughly dry.
Maintenance and Repair
For troubleshooting or repair information, contact Customer
Service at +1 315 685 4347.
Technical Specifications
WARNING Only qualified personnel should make electrical inspections and
repair of the S
o larc Light Source.
Supplier Name:
Address: Welch Allyn Lighting Products Division
4619 Jordan Road
PO Box 187
Skaneateles Falls, NY 13153-0187
Model or Type: S o larc Light Source LB-24