Welch Allyn Propaq Encore Monitor - User Manual - Manual (Page 16)

8 English Update: Propaq Encore Monitor Welch Allyn Propaq Encore Monitor
New Location for the ALL ALRM Key
The ALL ALRM key has been relocated to the Settings Menu under the Service Menu.
Respond to Equipment Alerts
SETUP NIBP ECG/RESP INV PRS SpO2/CO2
SETUP MENU 1
MORE ALARMS TRENDS
WAVE SEL
STATSCALE
MORE NIBP TEST IBP TEST SpO2 TST CO2 TEST
MORE NEXT CHANGE WAVE SEL PRINTER
SERVICE MENU 1
TEMP TEST PIXL TST
SERVICE MENU 2
MORE SETTINGS KEY TEST SYSTEM
SERVICE MENU 3
NET TEST
NEXT UP DOWN ENTER
TIME/DAY MENU
PREV MENU NEXT CHANGE ALL ALRM
SETTINGS MENU
SETUP MENU 2
MORE
SERVICE
WAVE SEL
ACUITY
To access the ALL ALRM key, press
MAIN MENU, SETUP, MORE, MORE,
SERVICE, YES, MORE, MORE,
SETTINGS, ALL ALRM.
MAIN MENU
Note If multiple equipment alerts occur simultaneously, the Propaq monitor displays a
MULTIPLE EQUIPMENT ALERT message. In certain situations, such as when a
channel is disabled, the source of the second alert is not displayed in the new
message. Look for blank numeric and waveforms areas on the screen to identify
the source(s) of multiple alerts.