Welch Allyn Connex Integrated Wall System, CIWS - Quick Reference Guide - Manual

Welch Allyn Connex ®
Integrated Wall System
Quick Reference Card
Power on/Standby
• Powers up the monitor
• Brief press – Sets monitor to
Display power saving mode
Battery status
Charging
Approximate operating time remaining
Battery removed or not holding a charge
Input clinician ID with barcode scanner
1. Touch the Clinician ID section (left edge) of the Device Status area.
2. Scan the clinician ID with a barcode scanner.
The ID appears in the field.
3. Touch OK.
Input patient ID with barcode scanner
1. Touch the Home tab.
2. Scan the patient’s ID with a barcode scanner.
The ID appears in the field.