Welch Allyn Connex Integrated Wall System, Required Service Tools and Test Equipment - Quick Reference Guide - Manual

Service and Maintenance Toolset
Connex ® Integrated Wall System
The following is the listing of tools to perform service and maintenance, as well as basic functional verification checks,
full functional verification checks and calibration on the Welch Allyn Connex Integrated Wall System. Please refer to the
device service manual for detailed descriptions of what these activities provide. Note: These tools must also be readily
available to complete Welch Allyn Technical Service Training for this device.
Required Service Tools and Test Equipment*
Material
Number
Description
Quantity
Required
Usage
06138-000 CAL-KEY, ASSY, M690/692 1
407691 VSM6000 SERVICE TEST BOX 1
407022 ASSY, MMF NURSE CALL CABLE - SERVICE 1
103521 Welch Allyn Service Tool CD 1
407672 BP TEST VOLUME REPAIR FIXTURE 113670 1
713549 USB 2.0 Dual A to Single Mini B Cable 1
01802-110 TESTER, CALIBRATION, 9600 PLUS 3
541-USB001 OAE USB 6' Cable 1
4500-925 Connectivity Accessory Kit - USB Cable 1
4500-30 Blood Pressure Hose (5') 1
6000-30 1-Tube Blood pressure hose (5 ft) 1
620216 Fitting “Y” 1/8 x 1/8 x 1/8 1
200-2000IN PRESSURE METER, NETECH 1
660-0138-00 CABLE,PATCH 5' RJ45,T568B 1
Only Required for Devices Equipped With Masimo SpO2
103507 TESTER, SPO2, MX RAINBOW 1
Only Required For Devices Equipped with Nellcor SpO2
DOC-10 CABLE, SP02 EXTENSION, NELCOR 1
SRC-MAX NELLCOR PORTABLE OXIMETRY TESTER (MP506) 1
Required Miscellaneous Off-the-Shelf Tools
The following tools are not available from Welch Allyn, but will be used in service and maintenance activities.
Description
Quantity
Required
COMPUTER RUNNING WINDOWS XP, SP3 or Windows 7 1
SPLINTER TWEEZER 3.5 INCH 1
NEEDLE NOSE PLIERS 6" 1
NETGEAR Router, A/B/G or Equivalent 1
PHILLIPS #2 1
PHILLIPS #1 1
10MM HEX BIT 1
SCISSORS 1
TIE WRAP CUTTER 1
TORX DRIVER 1
Indicates items only
available from Welch
Allyn, or a Welch Allyn
distributor.
Indicates equipment
required for full functional
verification checks and
calibration. The Welch Allyn
Service Tool software and an
active Gold License is also
required to perform these
checks. The Gold License is
obtained upon successful
completion of Welch Allyn
Technical Service Training.
Indicates equipment used
for basic functional
verification checks. The
Welch Allyn Service Tool
software (Silver Level) can
be used to perform the
NIBP checks and SWF
upgrades/updates as well
as installing Licensable
features on your device.**