Document Outline

• Spot Vital Signs LXi Operating Instructions
  • Blood Pressure Operation
  • SureTemp Plus Temperature Operation
    • 1. Remove probe from well and apply a new probe cover. Use the Navigation buttons to change the temperature mode then press the Select button.
    • 2. Place probe in contact with patient tissue as directed in the Directions for Use manual. When done, a beep sounds. The temperature appears on the display.
    • 3. Eject probe cover. Return probe to well before starting another measurement.
  • Braun ThermoScan® PRO 4000 Temperature Operation
    • 1. Remove probe from holder and apply a new probe cover; when ready, the device will beep.
    • 2. Fit probe snugly in the ear canal as directed in the Directions for Use manual.
    • 3. Press the Activation button. When done, a long beep sounds. The probe will display the temperature.
    • 4. Eject probe cover and return probe to the holder. The Spot Vital Signs LXi will display the temperature.
  • SpO2 Operation
• Spot Vital Signs LXi Operating Instructions
  • Blood Pressure Operation
  • SureTemp Plus Temperature Operation
    • 1. Remove probe from well and apply a new probe cover. Use the Navigation buttons to change the temperature mode then press the Select button.
    • 2. Place probe in contact with patient tissue as directed in the Directions for Use manual. When done, a beep sounds. The temperature appears on the display.
    • 3. Eject probe cover. Return probe to well before starting another measurement.
  • Braun ThermoScan® PRO 4000 Temperature Operation
    • 1. Remove probe from holder and apply a new probe cover; when ready, the device will beep.
    • 2. Fit probe snugly in the ear canal as directed in the Directions for Use manual.
    • 3. Press the Activation button. When done, a long beep sounds. The probe will display the temperature.
    • 4. Eject probe cover and return probe to the holder. The Spot Vital Signs LXi will display the temperature.
  • SpO2 Operation
    • 5. Apply sensor to patient. Verify there is a signal on the pulse signal bar graph. The SpO2 measurement and pulse rate will update continuously for 10 minutes.
• Spot Vital Signs LXi Operating Instructions
  • Blood Pressure Operation
  • SureTemp Plus Temperature Operation
    • 1. Remove probe from well and apply a new probe cover. Use the Navigation buttons to change the temperature mode then press the Select button.
    • 2. Place probe in contact with patient tissue as directed in the Directions for Use manual. When done, a beep sounds. The temperature appears on the display.
    • 3. Eject probe cover. Return probe to well before starting another measurement.
  • Braun ThermoScan® PRO 4000 Temperature Operation
    • 1. Remove probe from holder and apply a new probe cover; when ready, the device will beep.
    • 2. Fit probe snugly in the ear canal as directed in the Directions for Use manual.
    • 3. Press the Activation button. When done, a long beep sounds. The probe will display the temperature.
    • 4. Eject probe cover and return probe to the holder. The Spot Vital Signs LXi will display the temperature.
  • SpO2 Operation
• Spot Vital Signs LXi Operating Instructions
  • Blood Pressure Operation
  • SureTemp Plus Temperature Operation
    • 1. Remove probe from well and apply a new probe cover. Use the Navigation buttons to change the temperature mode then press the Select button.
    • 2. Place probe in contact with patient tissue as directed in the Directions for Use manual. When done, a beep sounds. The temperature appears on the display.
    • 3. Eject probe cover. Return probe to well before starting another measurement.
  • Braun ThermoScan® PRO 4000 Temperature Operation
    • 1. Remove probe from holder and apply a new probe cover; when ready, the device will beep.
    • 2. Fit probe snugly in the ear canal as directed in the Directions for Use manual.
    • 3. Press the Activation button. When done, a long beep sounds. The probe will display the temperature.
    • 4. Eject probe cover and return probe to the holder. The Spot Vital Signs LXi will display the temperature.
  • SpO2 Operation
  • Save/Send Operation
    • 1. Use the Navigation buttons to move the arrow to “Save/Next Reading” or “Send/Next Reading” in the Navigation window.
    • 2. Press the Select button. Spot Vital Signs LXi will transfer data electronically if it can or will save data in memory if it cannot transfer it. A blank status window will appear.
  • Manual Weight, Height, Respiration, Pain Entry
    • 1. Press the Navigation buttons to move the arrow in front of the desired parameter in the Navigation window.
    • 2. Press the Select button.
    • 3. Press the Navigation buttons up to increase values or down to decrease values.
    • 4. Press the Select button to accept the entry.
  • Memory/Print/Erase Operation
    • 1. Press the Memory button. Spot Vital Signs LXi will display the previous reading.
    • 2. Press the Navigation buttons to select the desired function and press the Select button. Follow instructions on the display.
  • Save/Send Operation
    • 1. Use the Navigation buttons to move the arrow to “Save/Next Reading” or “Send/Next Reading” in the Navigation window.
    • 2. Press the Select button. Spot Vital Signs LXi will transfer data electronically if it can or will save data in memory if it cannot transfer it. A blank status window will appear.
  • Manual Weight, Height, Respiration, Pain Entry
    • 1. Press the Navigation buttons to move the arrow in front of the desired parameter in the Navigation window.
    • 2. Press the Select button.
    • 3. Press the Navigation buttons up to increase values or down to decrease values.
    • 4. Press the Select button to accept the entry.
  • Memory/Print/Erase Operation
    • 1. Press the Memory button. Spot Vital Signs LXi will display the previous reading.
    • 2. Press the Navigation buttons to select the desired function and press the Select button. Follow instructions on the display.
  • Save/Send Operation
    • 1. Use the Navigation buttons to move the arrow to “Save/Next Reading” or “Send/Next Reading” in the Navigation window.
    • 2. Press the Select button. Spot Vital Signs LXi will transfer data electronically if it can or will save data in memory if it cannot transfer it. A blank status window will appear.
  • Manual Weight, Height, Respiration, Pain Entry
    • 1. Press the Navigation buttons to move the arrow in front of the desired parameter in the Navigation window.
    • 2. Press the Select button.
    • 3. Press the Navigation buttons up to increase values or down to decrease values.
    • 4. Press the Select button to accept the entry.
  • Memory/Print/Erase Operation
    • 1. Press the Memory button. Spot Vital Signs LXi will display the previous reading.
    • 2. Press the Navigation buttons to select the desired function and press the Select button. Follow instructions on the display.
  • Save/Send Operation
    • 1. Use the Navigation buttons to move the arrow to “Save/Next Reading” or “Send/Next Reading” in the Navigation window.
    • 2. Press the Select button. Spot Vital Signs LXi will transfer data electronically if it can or will save data in memory if it cannot transfer it. A blank status window will appear.
  • Manual Weight, Height, Respiration, Pain Entry
    • 1. Press the Navigation buttons to move the arrow in front of the desired parameter in the Navigation window.
    • 2. Press the Select button.
    • 3. Press the Navigation buttons up to increase values or down to decrease values.
    • 4. Press the Select button to accept the entry.
  • Memory/Print/Erase Operation
    • 1. Press the Memory button. Spot Vital Signs LXi will display the previous reading.
    • 2. Press the Navigation buttons to select the desired function and press the Select button. Follow instructions on the display.
• Spot Vital Signs LXi Operating Instructions
  • Blood Pressure Operation
  • SureTemp Plus Temperature Operation
    • 1. Remove probe from well and apply a new probe cover. Use the Navigation buttons to change the temperature mode then press the Select button.
    • 2. Place probe in contact with patient tissue as directed in the Directions for Use manual. When done, a beep sounds. The temperature appears on the display.
    • 3. Eject probe cover. Return probe to well before starting another measurement.
  • Braun ThermoScan® PRO 4000 Temperature Operation
    • 1. Remove probe from holder and apply a new probe cover; when ready, the device will beep.
    • 2. Fit probe snugly in the ear canal as directed in the Directions for Use manual.
    • 3. Press the Activation button. When done, a long beep sounds. The probe will display the temperature.
    • 4. Eject probe cover and return probe to the holder. The Spot Vital Signs LXi will display the temperature.
  • SpO2 Operation
• Spot Vital Signs LXi Operating Instructions
  • Blood Pressure Operation
  • SureTemp Plus Temperature Operation
    • 1. Remove probe from well and apply a new probe cover. Use the Navigation buttons to change the temperature mode then press the Select button.
    • 2. Place probe in contact with patient tissue as directed in the Directions for Use manual. When done, a beep sounds. The temperature appears on the display.
    • 3. Eject probe cover. Return probe to well before starting another measurement.
  • Braun ThermoScan® PRO 4000 Temperature Operation
    • 1. Remove probe from holder and apply a new probe cover; when ready, the device will beep.
    • 2. Fit probe snugly in the ear canal as directed in the Directions for Use manual.
    • 3. Press the Activation button. When done, a long beep sounds. The probe will display the temperature.
    • 4. Eject probe cover and return probe to the holder. The Spot Vital Signs LXi will display the temperature.
  • SpO2 Operation
• Spot Vital Signs LXi Operating Instructions
  • Blood Pressure Operation
  • SureTemp Plus Temperature Operation
    • 1. Remove probe from well and apply a new probe cover. Use the Navigation buttons to change the temperature mode then press the Select button.
    • 2. Place probe in contact with patient tissue as directed in the Directions for Use manual. When done, a beep sounds. The temperature appears on the display.
    • 3. Eject probe cover. Return probe to well before starting another measurement.
  • Braun ThermoScan® PRO 4000 Temperature Operation
    • 1. Remove probe from holder and apply a new probe cover; when ready, the device will beep.
    • 2. Fit probe snugly in the ear canal as directed in the Directions for Use manual.
    • 3. Press the Activation button. When done, a long beep sounds. The probe will display the temperature.
    • 4. Eject probe cover and return probe to the holder. The Spot Vital Signs LXi will display the temperature.
  • SpO2 Operation
• Spot Vital Signs LXi Operating Instructions
  • Blood Pressure Operation
  • SureTemp Plus Temperature Operation
    • 1. Remove probe from well and apply a new probe cover. Use the Navigation buttons to change the temperature mode then press the Select button.
    • 2. Place probe in contact with patient tissue as directed in the Directions for Use manual. When done, a beep sounds. The temperature appears on the display.
    • 3. Eject probe cover. Return probe to well before starting another measurement.
  • Braun ThermoScan® PRO 4000 Temperature Operation
    • 1. Remove probe from holder and apply a new probe cover; when ready, the device will beep.
    • 2. Fit probe snugly in the ear canal as directed in the Directions for Use manual.
    • 3. Press the Activation button. When done, a long beep sounds. The probe will display the temperature.
    • 4. Eject probe cover and return probe to the holder. The Spot Vital Signs LXi will display the temperature.
  • SpO2 Operation
• Save/Send Operation
  • 1. Use the Navigation buttons to move the arrow to “Save/Next Reading” or “Send/Next Reading” in the Navigation window.
  • 2. Press the Select button. Spot Vital Signs LXi will transfer data electronically if it can or will save data in memory if it cannot transfer it. A blank status window will appear.
• Manual Weight, Height, Respiration, Pain Entry
  • 1. Press the Navigation buttons to move the arrow in front of the desired parameter in the Navigation window.
  • 2. Press the Select button.
  • 3. Press the Navigation buttons up to increase values or down to decrease values.
  • 4. Press the Select button to accept the entry.
• Memory/Print/Erase Operation
  • 1. Press the Memory button. Spot Vital Signs LXi will display the previous reading.
  • 2. Press the Navigation buttons to select the desired function and press the Select button. Follow instructions on the display.
• Save/Send Operation
  • 1. Use the Navigation buttons to move the arrow to “Save/Next Reading” or “Send/Next Reading” in the Navigation window.
  • 2. Press the Select button. Spot Vital Signs LXi will transfer data electronically if it can or will save data in memory if it cannot transfer it. A blank status window will appear.
• Manual Weight, Height, Respiration, Pain Entry
  • 1. Press the Navigation buttons to move the arrow in front of the desired parameter in the Navigation window.
  • 2. Press the Select button.
  • 3. Press the Navigation buttons up to increase values or down to decrease values.
  • 4. Press the Select button to accept the entry.
• Memory/Print/Erase Operation
  • 1. Press the Memory button. Spot Vital Signs LXi will display the previous reading.
  • 2. Press the Navigation buttons to select the desired function and press the Select button. Follow instructions on the display.
• Save/Send Operation
  • 1. Use the Navigation buttons to move the arrow to “Save/Next Reading” or “Send/Next Reading” in the Navigation window.
  • 2. Press the Select button. Spot Vital Signs LXi will transfer data electronically if it can or will save data in memory if it cannot transfer it. A blank status window will appear.
• Manual Weight, Height, Respiration, Pain Entry
  • 1. Press the Navigation buttons to move the arrow in front of the desired parameter in the Navigation window.
  • 2. Press the Select button.
  • 3. Press the Navigation buttons up to increase values or down to decrease values.
  • 4. Press the Select button to accept the entry.
• Memory/Print/Erase Operation
  • 1. Press the Memory button. Spot Vital Signs LXi will display the previous reading.
  • 2. Press the Navigation buttons to select the desired function and press the Select button. Follow instructions on the display.
• Save/Send Operation
  • 1. Use the Navigation buttons to move the arrow to “Save/Next Reading” or “Send/Next Reading” in the Navigation window.
  • 2. Press the Select button. Spot Vital Signs LXi will transfer data electronically if it can or will save data in memory if it cannot transfer it. A blank status window will appear.
• Manual Weight, Height, Respiration, Pain Entry
  • 1. Press the Navigation buttons to move the arrow in front of the desired parameter in the Navigation window.
  • 2. Press the Select button.
  • 3. Press the Navigation buttons up to increase values or down to decrease values.
  • 4. Press the Select button to accept the entry.
• Memory/Print/Erase Operation
  • 1. Press the Memory button. Spot Vital Signs LXi will display the previous reading.
  • 2. Press the Navigation buttons to select the desired function and press the Select button. Follow instructions on the display.