Welch Allyn SureTemp Plus Pediatric Axillary Temperature - Quick Reference Guide - Manual

1. Ensure that the probe with the blue ejection
button and blue probe well are installed.
2. Remove the probe from the probe well.
3. Press Mode Selection button to select the
Pediatric Axillary Mode.
4. Observe the Pediatric Axillary Mode indicator on
the display (flashing Pediatric axillary icon).
5. Load a Welch Allyn probe cover.
6. Adjust clothing to visualize the axilla.
7. Avoid folds in the axilla and place the probe tip
vertically as high as you can as shown.
8. Place the arm snugly at the child’s side. Hold in
this position without movement of the arm or
probe during the measurement cycle.
Pediatric Axillary
Temperatures with
SureTemp
® Plus
Models 692/690