Welch Allyn SureTemp Plus Rectal Temperature - Quick Reference Guide - Manual

1. Ensure that the probe with the red ejection
button and red probe well are installed.
2. Remove the probe from the probe well.
3. Observe the Rectal Mode indicator on the
display (flashing lower body icon).
4. Load a Welch Allyn Probe cover. Apply lubricant
if desired.
5. Separate the buttocks and gently insert the
probe only 1.5 cm ( 5 /
8
inch), less for infants
and children.
WARNING: Incorrect insertion can cause bowel perforation.
6. Hold the probe in place for the entire
temperature.
7. Wash hands.
8. Use of Welch Allyn disposable probe covers is
recommended. Use of any other probe cover
may result in inaccurate temperature readings.
Rectal Temperature
Measurement with
SureTemp
® Plus
Models 692/690