Welch Allyn Acuity Central Station - Quick Reference Guide - Manual (Page 2)

PO Box 132, Rydalmere NSW 1701
1800 650 083
To Review and Print Waveform Data.
To Review A Discharged Patient’s Full Disclosure Information.
To Review Arrhythmia Events.
To Transfer or Discharge A Patient.
To Change Arrhythmia Alarm Limits If Applicable.
FOR USE WITH ARRHYTHMIA DETECTION:
To Review A Patient’s Dysrhythmias.
To Review and Print OxyCRG.
Open on-screen Propaq. Click Review , click Waveforms. Point
and click on the “ “ and “ “ keys to scroll through ECG
second by second, or point and click on the Time Line (24-96 hours)
to view the ECG at a particular time. To obtain printouts, use cursor
keys to position the beginning of the waveforms you wish to print at
the left side of the screen. Click Print, click Print Waveforms,
Cutom Print, or Print All Leads.
Open the on-screen Propaq. Click Review , click OxyCRG. Click
on the Time Line to locate data for review. Use the scroll bars as
necessary. Click Print. Click Close.
Open on Patient List icon (located on the bottom left corner of the
Acuity screen), select Unit, select Patient’s Name, click on desired
full disclosure icon; Graphical Trends, Waveforms or OxyCRG.
Open the on-screen Propaq. Click Event Review . Select
Arrhythmia/s. A list of events will display. Select Event, point and
click on the “ “ and “ “ keys to scroll through ECG event.
Press NET OFF, then switch off monitor.
Open the on-screen Propaq. Click Review , click Graphical
Trends. Point and click on the arrhythmia event marker (indicated
as a red or black heart) you want to view. Point and click on the
waveform icon at the bottom of the window. Scroll to the desired
waveforms if necessary.
Open the on-screen Propaq. Click Setup , click Arrhythmia
Alarms. Click the up or down arrow to set desired limit. Choose
priority level, check high, medium, low or off. Click Close.