Welch Allyn Connex Vital Signs Monitor, Radio Software Configuration - Installation Guide - Manual

Radio configuration guide
Connex ® Vital Signs Monitor 6000 Series and Connex ® Integrated Wall System
Overview
This guide explains the following:
• Accessing the radio software upgrade files.
• Creating a simple wireless network setup to install the radio software.
• Connecting to the radio configuration tool user interface.
• Updating your radio software.
• Client and server certificate requirements.
• Loading certificates.
• Enabling certificate-based authentication.
It applies to new devices or devices returned from the Welch Allyn service department.
Your network must be configured to use factory-supported SSIDs, as well as
authentication and encryption schemes.
Accessing the radio upgrade software
To access the radio software, call Welch Allyn Technical Support at 1-800-535-6663 to
receive the radio upgrade software files.
Note This guide only applies to devices using the 1.71.03 or greater software versions
and radios using the 3.00.01 or greater software versions.
Caution The instructions in this guide must be performed only by a qualified
biomedical service engineer or technician who is familiar with your facility’s
wireless network. If you are not familiar with your facility’s wireless network,
perform these tasks only with the assistance of a qualified technician.