Welch Allyn Virtual Channel Client Software - Installation Guide - Manual (Page 5)

Welch Allyn VCC software Network configuration 3
Installing VCC software
Before you begin
• Ensure that the thin-client workstation has the following:
• Windows
®
XP through Windows 8 with a 32- or 64-bit client operating system.
• A minimum of 2 MB disk space.
• One of the following:
• Microsoft
®
Remote Desktop Connection (RDS) client 5.0 or later.
• Citrix client 6.0 or later (required only for Citrix servers).
• Ensure that you have administrator rights for this computer.
• Close all programs before starting the installation.
Install the VCC drivers
1. Place the installation media for the Welch Allyn VCC software in your CD drive. The
Welcome screen appears.
If this screen does not appear, launch the autorun.exe file on the installation media.
2. Click Next.
The License screen appears.
3. Accept the license and click Next.
The Customer Information screen appears.
4. Ensure that the following values display:
5. Click Next.
The Ready to Install the Program screen displays.
6. Click Install. Setup installs the VCC components, and then displays a message
verifying a successful installation.
Note Microsoft .NET Framework is not required for the VCC client.
Field Value
User name The default value for this field is the value used when installing Windows on this
system. You do not need to change this field.
Organization The default value for this field is the value used when installing Windows on this
system. You do not need to change this field.
Install this application for Select one of the following:
•
Anyone who uses this computer (all users): Updates all users profiles
(existing and new).
Note: If multiple users are currently logged on, only the current user profile will
be updated. To update the other user profiles, you will need to install VCC again
after the other users log off.
• Only for me (UserName): Updates only the current user profile.