Welch Allyn Cardioperfect Workstation, Software Version 1.6.5 - Installation Guide - Manual (Page 24)

CardioPerfect Workstation
DIR 80013928, Ver. F 24 / 56
Before you begin

Make sure that you have administrator rights for this computer.

Close all programs before starting the installation.
Configure the CPWS server
Install CPWS on the server as described in “Install CPWS software,” starting on page 12. It is not
necessary to install the drivers for the acquisition devices on the server.
Although the installer may handle this on its own, it is good practice when installing new software on a
version of Windows Server to switch to “Install Mode” before installing CPWS or any of its components.
This can be accomplished by typing the following command in the command prompt:
change user /INSTALL
After installing CPWS and its components, you can exit Install Mode by entering the following command:
change user /EXECUTE
You can obtain the current status by entering this command:
change user /QUERY
This applies only to systems with Terminal Services installed or configured when operating in “Application
Mode.” If in Remote Administration mode (the only mode available if Terminal Services is not installed),
this has no effect.
Configure thin clients for ECG and Spirometry
1. Close all running programs.
2. Insert the CardioPerfect Workstation disc. The installer menu appears. (If this menu does not appear,
explore the disc, and run installer.exe.)
3. Click CardioPerfect Connectivity Tools, then click Install PerfectLink thin client support.
The Welcome screen appears.
4. Click Next.
5. Start a thin-client remote session. Within CardioPerfect running in the remote session:
a. Navigate to the Settings dialog, then the ECG section and the Recorder tab.
b. Select PerfectLink as the port to use.
c. In the Spirometry section, go to the Recorder tab.
d. S
elect PerfectLink in the “Connect to” dropdown list.
Note: If you plan to connect the USB PRO ECG or Spiro USB recorder to several thin-client PCs,
install PerfectLink on each thin client. PerfectLink enables the remote server to see
USB-connected devices.