Welch Allyn Cardio Perfect Workstation ECG Recorder Install (Windows XP) Instructions - Installation Guide - Manual

INSTAllINg The eCg ReCORDeR
ON A CARDIOPeRfeCT
WORKSTATION
Before you start, install the CardioPerfect Workstation software.
See separate installation guide.
1 Assemble the eCg recorder, and then plug it into
any USB port.
2 Set up the USB ports.
This screen might not appear.
Caution: When the Found New Hardware
wizard appears this second time, do not
cancel. You must complete the wizard
twice per USB port. Otherwise, the
software will not be installed properly.
(next page)
C A R D I O P E R F E C T ™
WORKSTATION
INSTA L L ATION GUIDE
Windows ® XP