Welch Allyn Cardio Perfect Workstation Spirometer Install (Windows XP) Instructions - Installation Guide - Manual

INSTAllINg The SPIROMeTeR
ON A CARdIOPeRfeCT
WORKSTATION
1 Assemble the spirometer, and then plug it into
any USB port.
Caution: With the spirometer, always use the USB
extension cable, as shown. This cable helps to prevent
damage to the spirometer.
Before you start, install the CardioPerfect Workstation software.
See separate installation guide.
2 Set up the USB ports.
This screen might not appear.
(next page)
C A R D I O P E R F E C T ™
WORKSTATION
INSTA L L ATION GUIDE
Windows ® XP