Welch Allyn Mobile Acuity LT - Installation Guide - Manual (Page 7)

7
Identify or change a Propaq LT monitor
network name
To identify a Propaq LT monitor network name and
prepare to change it (if desired)
1. Highlight SpO2, and then press .
2. Highlight Setup, and then press .
The Setup menu appears.
3. Highlight Service, and then press .
The Service menu appears.
4. Highlight Radio, and then press .
The Radio menu appears, and Show Info is
highlighted
5. Take one of these steps:
• If you want to change the network name:
Continue below to “To proceed to change a
Propaq LT monitor network name”.
• If you do not want to change the network
name:
a. Press .
The current network name is shown.
b. Highlight Exit, and then press .
You have completed the network name
identification process.
To proceed to change a Propaq LT monitor network
name
1. Highlight NetName and press .
2. Highlight the new network name.
3. Carefully confirm that the highlighted name
matches the appropriate Acuity System
network name.
4. Simultaneously press and , and hold
for one second.
The Propaq LT monitor turns off and on
again, and then it attempts to connect to the
Acuity System network.
Identify or change a wireless Propaq CS
monitor network name
To identify a wireless Propaq CS monitor network
name and prepare to change it (if desired)
1. Touch , SETUP, MORE, MORE,
SERVICE, YES, MORE, MORE, RADIO.
The Network Status screen opens, and the
NET NAME is listed.
2. Take one of these steps:
• If you want to change the network name,
continue below to “To proceed to change a
wireless Propaq CS monitor network
name”.
• If you do not want to change the network
name, touch to return to the main
menu.
To proceed to change a wireless Propaq CS monitor
network name
1. Touch CHANGE NET NAME.
The Change Net Name screen appears.
2. Touch NEXT repeatedly until the new
network name is highlighted.
3. Carefully confirm that the highlighted name
matches the appropriate Acuity System
network name.
4. Touch SELECT.
An ARE YOU SURE? confirmation screen
appears.
5. Respond to the confirmation prompt.
If you touch YES, the Propaq CS monitor
turns off and on again, and then it attempts
to connect to the Acuity System network.
Technical support
• United States 1 800 289 2501
• Worldwide +1 503 530 7500
Ask for Technical Support.