Installation, Spot lxi and vsm 6000 series, 2 - installation – Welch Allyn Connex CSK 4.1.X - Installation Guide User Manual
Page 13
2
9
Installation
Spot LXi and VSM 6000 Series
Before you install the Welch Allyn Connex CSK software do the following:
•
Verify that the connectivity settings in the device software are properly configured.
For details, see the device’s directions for use.
•
When using a client/server configuration, please install the server software on the
database server before installing the clients.
•
If using wireless communications, check the device’s settings. Verify that these
settings match the access point settings.
•
Verify that you have administrator rights for the PC.
•
Close all programs before starting the installation.
•
If “Device driver signing” appears, select either “Yes” or “Continue.”
To install the Welch Allyn Connex CSK software
1.
Insert the Connex CSK CD. This screen appears:
If this screen does not appear, open Connectivity Install on the CD.