Welch Allyn Poem NIBP Module DeveloperS Kit Instructions - Installation Guide - Manual

Copyright © 2002 by Welch Allyn OEM Technologies. Welch Allyn
®
is a registered trademark and POEM™ and
Smartcuf™ are trademarks of Welch Allyn, Inc. Welch Allyn, Inc. is protected under various patents and patents
pending. Welch Allyn OEM Technologies is a division of Welch Allyn, Inc.
Information furnished by Welch Allyn OEM Technologies is believed to be accurate and reliable. However, no
responsibility is assumed by Welch Allyn OEM Technologies for its use, nor for any infringements of patents or other
rights of third parties which may result from its use. No license is granted by implication or otherwise under any
patent or patent rights of Welch Allyn OEM Technologies.
Disclaimers: This document may be wholly or partially subject to change without notice. All rights are reserved. No
one is permitted to reproduce or duplicate, in any form, the whole or part of this document without written permission
from Welch Allyn OEM Technologies.
Welch Allyn OEM Technologies • 8500 SW Creekside Place, Beaverton, OR 97008-7107 U.S.A.
Phone: 503-530-7900 • Fax: 503-526-4901
810-1209-01 Rev. A 12/02
Overview
The POEM NIBP Module Developer’s Kit provides the hardware, software, and accessories
required to operate a POEM NIBP Module from a Personal Computer (PC). This allows a
developer to control the POEM Module and view its NIBP and diagnostic outputs without having
to develop hardware and software interfaces to a host system. This version of the Developer’s Kit
includes:
• POEM Module Interface Box which includes:
• POEM Module and pump mounted inside for physical protection, acoustical damping
• Interface Board mounted on top for connections to power and data communications
• External NIBP hose fitting
• Interconnect ribbon cable between Module and Interface Board (PN 660-0164-XX)
• CD with POEM PC and POEM Talk Software (for PC) and manuals.
• NIBP Cuff (adult, reusable)
• NIBP Hose (10 ft.)
• RS232 Cable for connecting Interface Board to PC (PN 660-0163-XX)
• Sync Cable for connecting source for ECG synchronization signal (PN 660-0178-XX)
• 9 Vdc international power adapter (with interchangeable mains plugs) operating on
nominal 100-240 Vac, 50/60 Hz (PN 503-0122-00).
• POEM NIBP Module OEM Implementation Manual - Provides detailed information
about the POEM NIBP Module and how to integrate it into a host system.
• POEM PC User Manual and POEM Talk User Manual - Describe how to install and
use these software applications for development.
POEM
™
NIBP Module Developer’s Kit Instructions
Developer’s Kit Part Number 007-0035-00