Parts listing, Sonoma series, Basic workcenters – Workrite Sonoma Series BASIC User Manual
Page 2
Sonoma Series
™
BASIC Workcenters
1450 Technology Lane • Petaluma, CA 94954 • 800-959-9675 • www.workriteergo.com
Page 1
PARTS LISTING
Top (size and shape differ for each model)
If Workrite is not supplying the top, it is installer’s
responsibility to position the base under the worksurface
to provide maximum stability.
Leg Assemblies (2 or 3)
Nuts and lock
washers are
already threaded
on studs.
Top Brackets (2 or 3)
Crossbar (1 or 2)
Foot caps (4 or 6)
Ring Pins (2 or 3)
Leveling Glides (4 or 6)
Feet (2 or 3)
5/32” Allen Wrench
3/4” Button Head
machine screws (12 or 20)
and lock washers (12 or 20)
Wood screws (20 or 24)
Crossbar Brackets (2 or 3)
Crossbar Bracket for
center leg if a three
leg table
Stiffening Brackets (2)
For two leg tables
only
Top Bracket for center
leg if a three leg table
For assembly of two-piece tops,
please refer to separate instructions.
Quantities indicated vary for two leg and three leg workcenters.
Acorn Nuts (2)
For three leg tables only