Workrite two-piece Worksurfaces - Manual (Page 2)

2 Workrite Ergonomics | 800.959.9675 www.workriteergo.com
Assembly Instructions for two-piece worksurfaces #1500123 - Rev B
2
3
Attach Brackets
Insert Brackets into recessed cuts. Secure with Phillips-head screws.
F
G
Ensure Fit
It might be necessary to level the seam after the worksurface is assembled. If this is required,
loosen the Draw Bolts about ¾ turn. Tap the raised side with a soft face hammer, or protect the
surface with a pad and use a regular hammer, until the surface is level. Then retighten the bolts.