Workrite Fundamental Desk Light - Manual

1 of 2 Workrite Ergonomics | 800.959.9675 www.workriteergo.com
Fundamentals™ Desk Lamp – Instructions #1500210 - Rev A
Assembly Instructions:
Fundamentals Desk Lamp
Attach Light Arm (A) to Light Base (B)
Align Light Arm (A) bottom hole with Light
Base (B) pin and attach. Apply pressure
until arm *snaps* onto base.
Attach Light Head (C) to Light Arm (A)
Align Light Head (C) back hole with Light
Arm pin and attach. Apply pressure until
Light Head (C) snaps onto arm.
Attach Transformer & plug in to outlet
Connect cord from Transformer (D) to port
on back of Light Arm (A) near the base.
Plug Transformer into all outlet.
Support
Replacement Transformer: Model#TR-12240500-A-SF3.5
Transformer specifications: 12W, 24V, 0.5A, Type-A Plug, Straight Female - 3.5MM Connector
Technical Support: Please call Workrite Technical Support while at the Workrite product.
(800) 969-9675 option 2.
A
Light Arm
Qty: 1
C
Light Head
Qty: 1
B
Light Base
Qty: 1
D
Transformer
Qty: 1
No tools are required to assemble Fundamentals Desk Lamp
Parts
Note! If attaching light to adjustable
height worksurface, raise worksurface to
maximum height before positioning fixture
to ensure that cord will reach the outlet
when worksurface is raised.
WARNING: Deviation
from the assembly
instructions may result
in a risk of fire or
electric shock.
1
2
3
i
*snap!*
*snap!*
A
B
C
D
A