Workrite Ciglio Parent - Manual

1 of 2 Workrite Ergonomics | 800.959.9675 www.workriteergo.com
Workrite Ciglio LED Under-Cabinet Parent Lights - Assembly Instructions #1500189 Rev B
A
Light Fixture
Qty: 1
B
Universal Mounting Kit
Qty: 2
Parent Model
If installing parent unit of daisy chain, be sure to position parent unit so that it can be connected to
the additional unit with its supplied jumper cable.
Mount to Cabinet
Determine if light will be affixed to a metal or wood cabinet and follow the appropriate step below.
Mount to METAL Cabinets:
Place Magnetic Mounts (B) onto back of
Light Fixture (A).
Attach Light Fixture to metal under-cabinet.
Magnets will hold the fixture in place.
Mount to Wood Cabinets:
Note: You will need a #2 Phillips-head screwdriver to complete this step.
Determine where you want to mount
your light and draw a straight line on the
underside of the cabinet to indicate the
center along the length of the light.
Attach the Universal Mounts (B) along
your line with Screws provided by
inserting screw through magnet and then
screwing into marked location.
Attach Light Fixture (A) onto mounts.
Magnets will hold the fixture in place.
!
C
Transformer, 48 W
Qty: 1
D
Power Adaptor Cable
Qty: 1
Parts
Assembly Instructions:
Ciglio Under-Cabinet Light
Daisy Chain Parent Models
Draw line
1
Place lamp
under cabinet
b
a
B
A
a
b
a
b
Under-cabinet
8"–15" depending on size
a
b
A
B
Draw line parallel to
edge of cabinet
c
Lift light
onto mounts
Attach Mounts
along drawn
line
c
OR