Xpres 3D SMARTone - Manual (Page 10)

3D SMARTone INSTALLATION AND OPERATION
10
•
The screen will show the process timer
counting down
• The dial will show the vacuum level.
NB: the vacuum level will pulse in the initial stages of
the cycle
•
When complete, a buzzer will sound and the
drawer can be opened.
•
Remove the film and unclip the part.
•
SMARTone part removal tool is recommended
•
The part will cool quickly and can then be
used/packaged for sale straightaway.
• The SMARTone is ready for its next cycle.
• Either load the next part or close the drawer
to keep warm. The keep warm cycle starts 2
minutes after the drawer is closed if the start
button has not been pressed.